| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002YBG00OX |
| Title: A750F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY (2008 Sequoia) | ||
DISASSEMBLY
1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
|
(a) Using a thin-bladed screwdriver, release the connector housing retainer. |
(b) Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.
|
(c) Rotate the indicator light wire counterclockwise to align the key part and remove the wire. |
2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY
|
(a) Disengage the 4 claws and remove the position indicator housing. |
3. REMOVE POSITION INDICATOR SLIDE COVER
|
(a) Remove the position indicator slide cover with No. 2 position indicator slide cover. |
4. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
|
(a) Remove the No. 2 position indicator slide cover from the position indicator slide cover. |
5. REMOVE SHIFT LOCK RELEASE BUTTON
|
(a) Disengage the 2 claws and remove the shift lock release button and shift lock release spring. |
6. REMOVE LOWER POSITION INDICATOR HOUSING
|
(a) Using a small screwdriver, disengage the 6 claws and remove the lower position indicator housing. |
7. REMOVE SHIFT LOCK CONTROL ECU
|
(a) Disconnect the shift lock solenoid connector. |
(b) Disengage the 3 claws and remove the shift lock control ECU.
|
|